Konica Minolta 7045 User Manual page 129

Applications
Image Insert (continued)
Application Selection Screen
1 Review the pages to be scanned from the document feeder, and note the page
number locations for inserting images scanned from the platen glass.
To insert more than one sheet at the same location, enter the page number repeatedly.
For example, if insertion locations are [2/2/6], scanned platen images will be inserted
as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first scanned
Image insertion.
The third scanned platen image will be inserted after page 6.
2 Press [
APPLICATION
Screen.
3 Touch
Image Insert
4 Use the keypad on the Control panel to enter the page numbers for up to 15
insertion locations, touching
• When a page number is larger than the total original count, a sheet is inserted as
the last page.
• Entering the same page number twice will insert two sheets at that location.
• Insertions occur in sequence, even if page numbers are entered out of sequence.
• To clear an incorrect entry, touch
correct page number.
Option: Touch Booklet on the Image Insertion Page Setting Screen to use this function.
5 When all page number entries are made, touch
The Application Selection Screen will be displayed.
6 Make additional application selections, or touch
8-18 Applications
] on the control panel to display the Application Selection
to display the Image Insertion Page Setting Screen.
after each entry.
SET
DELETE
Image Insert Page Setting Screen
or [C] (
CLEAR QTY.
.
OK
to return to the Basic Screen.
OK
), then enter the