Konica Minolta 7045 User Manual page 16

Introduction
Features of the Konica 7045 Printer/Copier (continued)
• Booklet Mode
This Application mode feature allows you to scan letter size originals into memory and
copy them into a booklet format on letter size folding to 5.5"x8.5" or ledger size folding to
8.5"x11". Original scan be single sided or two sided.
• Chapter
This Application mode feature allows you to start each new chapter or section on the
right hand page when making two-sided copies by entering the actual page number of
each chapter title page.
• Check Key
The Check mode allows you to view all job selections before actually printing a job. To
display the Check Screen, touch the Check Key before pressing Start.
• Clear Qty
This feature allows you to change only the print quantity without changing the other
settings.
• Combination Mode
This Application mode feature includes 2 in 1, 4 in 1 and 8 in 1 modes. The Combination
feature allows you to scan 2, 4, or 8 originals into memory then copy them onto on page
for quick reference. This efficient use of paper that provides information at a glance also
reduces the amount of paper to be filed in a drawer or carried in a brief case.
• Copy Density
Choose from nine density selections to select density manually.
• Copy Mode
For copy modes are available. In the simplex modes, copies are output with image on
one side only. In the duplex mode, copies are output with image on both sides of the
sheet. Select a simpex mode of 1-sided to 1-sided or 2-sided to 1-sided; or select a
duplex mode of 1-sided to 2-sided or 2-sided to 2-sided.
• Density Shift
Density Shift can be used to adjust the density levels for four modes, Text/photo, Text,
Photo, Increase Contrast. Density Shift divides each level into two levels of lighter and
three levels of darker density.
1-6 Introduction