Konica Minolta 7045 User Manual page 119

Applications
Chapter
Chapter is used with RADF in 1-2 or 2-2 mode for the purpose of locating title pages on
the right side, rather than the reverse side, of a duplex copy.
To effectively locate the title page on the right, a blank sheet will be automatically
created on the reverse side of a sheet, if required.
Scan and store originals into memory, then print all the pages collectively.
NOTE: Should memory overflow occur frequently, it is recomended that you contact your Konica service
representative to extend the memory capacity in your machine.
Use RADF store mode when the original count exceeds 50.
Use Platen store mode when originals are not suitable for use with the RADF.
See p. 6-23 to p. 6-25 for details of the Store mode.
Max. title pages: 15 sheets, from 1 ~ 999
Copy mode: 1-2 or 2-2 mode only
Incompatible Basic Copying Conditions: 1-1, 2-1
Incompatible Output Modes: Group
Incompatible Applications: Sheet/Cover Insertion, Combination, Transparency Interleaving and
Thin/Thick Paper modes in Special Paper, Image Insert, Book Copy, Repeat, AUTO Layout,
Non-Image Area Erase, OVERLAY
1-sided originals
1
8-8 Applications
Tilte page
8
7
5
4
3
6
2
Title pages
Copies in Chapter mode
6
4
2
1
Title page
2-sided originals
Title pages
8
3
1
7
5