Table of Contents
Advertisement
Applications
Repeat Image (continued)
To select the Auto detection mode, touch
automatically.
To select the Repeat mode:
(1) Touch
Repeat
(2) Touch
2 Repeat
Touch
OK
4 Touch
on the Repeat Mode Selection Screen to return to the Application
OK
Selection Screen.
5 Make additional application selections, or touch
APS and AMS are automatically released, and 1.00 (100%) is selected as a
magnification ratio.
6 Select the desired magnification ratio and copy size.
NOTE: When 2 Repeat, 4 Repeat, or 8 Repeat is selected, the scanning area will be a portion of the selected
copy size equally divided according to the selected mode. In this case, magnification ratio will be fixed
to 1.00 (100%).
7 Enter the desired print quantity from the control panel keypad.
8 Position the original FACE DOWN on the platen glass.
When selecting 2 Repeat, 4 Repeat, or 8 Repeat, position original(s) FACE UP in the
document feeder or FACE DOWN on the platen glass.
IMPORTANT: DO NOT CLOSE THE DOCUMENT FEEDER WHEN AUTO IS
SELECTED IN STEP 3.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-29 to p. 6-30.
9 Press [
].
START
After copying is completed, press [
machine.
8-36 Applications
. The Repeat Screen will be displayed.
,
, or
4 Repeat
to restore the Repeat Mode Selection Screen.
. Non-image area erase will function
AUTO
, as desired.
8 Repeat
OK
] to release the mode and reset the
AUTO RESET
to return to the Basic Screen.
Advertisement
Table of Contents
Troubleshooting
