Password Setting [5] - Konica Minolta 7045 User Manual

Key Operator Mode
Weekly Timer [9] (continued)

Password Setting [5]

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Default setting: Timer interrupt password 0000
Weekly Timer Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
9. Weekly Timer
to display the Weekly Timer Setting Menu Screen.
OK
NOTE: If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.
3 Touch
5. Password setting
4 Input a new 4-digit password using touch panel keypad, and touch
the setting.
NOTE: When the password setting is 0000 (factory default setting), timer interrupt can be used simply by
pressing the power switch.
5 Touch
RETURN
timer settings are required, select the desired menu item.
6 Touch
RETURN
settings are required, select the desired menu item.
7 If no further changes are required, touch
perform copying operations.
11-42 Key Operator Mode
. Enter your 4-digit Weekly timer master key code, then touch
to display the W.T. Interrupt Password Setting Screen.
to restore the Weekly Timer Setting Menu Screen. If other Weekly
to restore the Key Operator Mode Screen. If other key operator
W.T. Interrupt Password Setting Screen
Key-Ope mode
to display the Key Operator
OK
to restore the Basic Screen to
RETURN
.
to complete
OK