Density Shift [15] - Konica Minolta 7045 User Manual

Key Operator Mode

Density Shift [15]

Density shift divides each of nine density levels into two levels of lighter and three levels
of darker when used in combination with Text/Photo Enhance.
Density shift selection can be made in each of four Text/Photo Enhance modes; Text/
Photo (general), Text, Photo, and Increase Contrast.
Setting options: Density shift 0/ 1/ 2/ 3 (standard)/ 4/ 5
Key Operator Mode Screen 1
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 To display menus 11. to 16. of the Key Operator Mode Screen, touch the
arrow key.
3 Touch
15. Density Shift
4 Select the Text/Photo Enhance mode.
Touch
Text/Photo
desired density shift (from 0 to 5) using the Control panel keypad.
5 Touch to complete the settings and return to the Key Operator Mode Screen. If
OK
other key operator settings are required, select the desired menu item.
6 If no further changes are required, touch
perform copying operations.
11-54 Key Operator Mode
Density shift 4
Density shift 5
Key Operator Mode Screen 2
to display the Density Shift Setting Screen.
, , , or
TEXT PHOTO
Density shift 0
Density shift 1
Density shift 2
Density shift 3
Key-Ope mode
OK
Increase contrast
to restore the Basic Screen to
RETURN
Density Shift Setting Screen
.
to display the Key Operator
to highlight it, then enter the
Lower