Output Modes - Konica Minolta 7045 User Manual

Output Modes

Finisher Specifications (continued)
Staple-Sort Mode
Paper size: 11"x17"~5.5"x8.5"R (1 staple only on 5.5"x8.5"R)
Paper weight: 16~24 lb
Paper capacity for 20 lb: Paper exits to the middle/lower tray only.
Staple capacity: 50 sheets*
Staple position: See p.7-11
NOTES:
1
* : Staple sheet capacity in normal mode is changeable, and may be set to 45, 40 or 35 by service.
2
* : Staple sheet capacity in thick paper mode is changeable, and may be set to 25, 15 or 10 by service.
Face Up Mode
Paper size: 11"x17" ~ 5.5"x8.5"R
Paper weight: 16~32 lb
Paper capacity for 20 lb: Paper exits to the upper tray only.
Paper Exit Switching Function of Finisher Tray
When the amount of copies delivered to any Finisher tray exceeds the limit, the copier
automatically shifts the output to another tray to complete the output job.
Finisher upper tray:
After 100 sheets (irrespective of the paper size) delivery, the output shifts to the
middle, then lower tray.
Finisher middle tray:
After 300 sheets (11"x17" or 8.5"x14", 5.5"x8.5"R)/700 sheets (8.5"x11"R, 8.5"x11",
A4R, A4) delivery, the output shifts to the lower tray.
Finisher lower tray:
After 300 sheets (11"x17" or 8.5"x14", 5.5"x8.5"R)/700 sheets (8.5"x11"R, 8.5"x11",
A4R, A4) delivery, the output shifts to the middle tray.
The 7045 copier defaults to this Paper Exit Switching function. If you desire to release
this function, contact your service representative.
NOTE:
When the print quantity selected exceeds the finisher capacity, the copier automatically stops printing
before the number of discharged copies exceeds the capacity. Remove the copies from the tray, then press
[START] to complete the job.
700 sheets (8.5"x11", 8.5"x11"R, A4R, A4)
300 sheets (11"x17", 8.5"x14", 5.5"x8.5"R)
1 in normal paper mode (5.0mm thick or less)
2
20 sheets* in thick paper mode
100 sheets (11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"R, A4R, A4)
10 sheets (thin/thick paper, transparency film, etc.)
Output Modes 7-3