Basic Operations
Lens Mode (continued)
Vertical/Horizontal Zoom (continued)
Vertical
zoom key
1 Touch
to display the popup menu for setting the zoom ratio.
ZOOM
2 Touch the Vertical zoom key (
3 Use keypad on the popup menu to enter the desired reduction or enlargement ratio
in 3 digits; or use arrows to scroll to the desired ratio.
NOTE: If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
4 Touch the Horizontal zoom key (
5 Use keypad on the popup menu to enter the desired reduction or enlargement ratio
in 3 digits; or use arrows to scroll to the desired ratio.
6 When the desired ratios are specified, touch
menu disappears automatically.
To cancel the setting, touch
6-14 Basic Operations
Basic Screen
) to select a vertical ratio.
) to select a horizontal ratio.
again, enter the desired ratios, then touch
ZOOM
to complete the setting. The popup
OK
.
OK