Specifications - Konica Minolta 7045 User Manual

Specifications

Recommended Operating Environment 50 ~86 F (10 ~30 C); 10~80% RH
14-2 Machine Specifications
Product Name Konica 7045
Configuration Console with stationary platen
Photoreceptor OPC drum
Method Laser Electrostatic
Warm Up Approx. 90 sec. @68 (20 C); 50% RH
Auto Reset Off/30 sec./1 min./1.5 min./2 min./2.5 min./
First Copy Out Time From Platen Glass:
Copy Rate 45 cpm: 8.5"x11"
Continuous Copy 1~999 copies
Copier Power Source 120V 10%/15A; 60Hz 2.5Hz
Power Consumption Max. 1,500VA (full option)
Noise Level (full system) Approx. 59 dB (A) or less, during copying
Automatic Modes AMS; AES (plus 9-level manual density);
Magnification Presets; 0.50, 0.65, 0.77, 1.00, 1.29, 1.55, 2.00
Originals on Platen Max. size: 11"x17" (280mmx432mm)
Specifications Subject To Change Without Notice
Toner Black, cartridge type
3 min./3.5 min./4 min./4.5 min./5 min.
3.9 sec. for 8.5"x11"
32 cpm: 8.5"x11"R
27 cpm: 8.5"x14"
23 cpm: 11"x17"
41 cpm: 5.5"x8.5"
Copying: 1,300 VA (full option)
APS detects 11"x17", 8.5"x14", 8.5"x11"R,
8.5"x11", 5.5"x8.5"
3 User Sets - 0.25~4.00, set by key operator
Zoom range - 0.25~4.00 in 1% steps