Konica Minolta 7045 User Manual page 223

Key Operator Mode
Memory Switch [12] (continued)
Key Operator Mode Screen 1
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 To display menus 11. to 16. of the Key Operator Mode Screen, touch the
arrow key.
3 Touch
12. Memory SW
Screen can be scrolled to the third screen.
4 Use the procedure below to select the desired item and change the setting.
(1) Use Upper arrow and
Switch Screen to scroll the screen.
(2) Touch Upper arrow or
Screen to highlight the desired item.
(3) Touch
EDIT
(4) Repeat above steps (1) to (3) to make several changes in succession.
5 Touch
RETURN
settings are required, select the desired menu item.
6 If no further changes are required, touch
perform copying operations.
Key Operator Mode Screen 2
Memory Switch Screen 2
to display the Memory Switch Screen. The Memory Switch
Lower arrow keys at the lower left on the Memory
Lower arrow key at the right on the Memory Switch
to change the setting of the highlighted item.
to restore the Key Operator Mode Screen. If other key operator
Memory Switch Screen 1
Memory Switch Screen 3
Key-Ope mode
to display the Key Operator
OK
to restore the Basic Screen to
RETURN
.
Lower
Key Operator Mode 11-47