Face Up Mode - Konica Minolta 7045 User Manual

Output Modes

Face Up Mode

In the normal exit mode, i.e., without Face Up mode selected, copies exit to the exit tray
in the same order as the originals. In the simplex mode, for example, every sheet exits
face down, and in the duplex mode, odd numbered sides exit face down. When the
speedier Face Up mode is selected, copies exit to the upper tray of the Finisher in the
reverse order, with simplex sheets and odd numbered duplex sheets face up.
The Finisher upper tray only can be used.
Face up mode cannot be selected together with Sort or Staple.
When using platen glass in simplex copying, place the originals in reverse order to get
effective results.
Incompatible: Staple-Sort
Using Multi-sheet bypass tray automatically sets the copier to be in Face up mode. If you
desire to release this setting, contact your service representative.
Control panel
CHECK
APPLICATION
JOB MEMORY
1 Press [
OUTPUT
2 Touch
TRAY1
In this case, the copied sets will be sorted automatically. Touch
Group mode.
3 Touch to complete the setting and return to the Basic Screen.
OK
HELP
1
4
OUTPUT
7
] to display the Output Mode Screen.
and
Face UP TRAY1
Output Mode Screen
2
5
8
0
.
to output in
GROUP
Output Modes 7-13