Book Copy - Konica Minolta 7045 User Manual

Applications

Book Copy

The Book Copy mode performs image division on the original image. Use Book Copy,
for example, to copy an open book or 11"x17"/ 8.5"x11"R onto two 8.5"x11"/ 5.5"x8.5"R
sheets in 1-1 or 2-1 mode, or onto the front and back sides of one 8.5"x11"/ 5.5"x8.5"R
sheet in 1-2 or 2-2 mode.
The following three modes can be selected from the Book Copy Screen.
1 Full Scan mode: Image division starts from the first scan.
2 Front Cover + Full Scan mode: Image division starts from the second scan after the
first scan copies normally.
3 Front/Back + Full Scan mode: Image division starts from the third scan after the first
and second scan copy normally.
Store mode is automatically selected. See p. 6-23 to p. 6-25 for details.
Use Platen store mode for scanning front and back covers.
NOTE: Should memory overflow occur frequently, it is recomended that you contact your Konica service
representative to extend the memory capacity in your machine.
Original paper: 11"x17", 8.5"x11"R, 5.5"x8.5"R
NOTE: Originals are not limited in size, however, carefully select an appropriate magnification ratio and
setting orientation when copying original sizes other than the sizes mentioned above.
Copy paper: 8.5"x11", 5.5"x8.5"R (use Rotation) (20 lb recommended)
Incompatible Basic Copying Conditions: APS
Incompatible Output Modes: None
Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, Image Insert, Special
Original (Mixed Original, Folded Original, Non-Standard Size, Upside Down), Repeat, Image
Shift, STAMP/OVERLAY
Application Selection Screen
8-20 Applications
Book Copy Screen