Konica Minolta 7045 User Manual page 161

Job Memory
Job Store (continued)
1 Make job selections from the Basic Screen, Application Selection Screen and/or Output
Selection Screen, then return to the Basic Screen.
2 When all selections are made, press
Screen.
3 Touch . The Job Store Check Screen displays to enable you to review the
ENTRY
settings. Touching
Screen.
(See Sample Job Store Check Screen, previous page.)
4 If settings are correct, touch
Otherwise, touch
5 When the Job No. Selection Screen is displayed, touch one of the keys numbered from
1~15 to store the job under that number. Arrow keys can be used to scroll through the
15 job numbers. The selected number key will be highlighted, and touch
the Job Name Registration Screen.
If you wish to cancel this selection, touch
displays the settings for the job. If you wish to cancel the settings, press
6 Enter a job name in up to 20 characters, using the touch screen alphabet keypad. If
required, scroll with the upper and lower arrows to use lower case and symbol keys.
To correct an entry, touch
the correct job name.
If you do not wish to enter a name, touch
The key displays [
7 If the Job name is correct, touch
To re-enter the Job name, touch
Screen.
8 When the Job No. Selection Screen is displayed, touch
return to the Basic Screen.
NOTES:
1 A locked job is indicated by a lock icon on the Job key number.
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 [ ] displayed on a Job number key indicates that a job is stored but unnamed.
6 Job Memory entries can be recorded on the Job Memory Form included at the end of this section.
on the Job Store Check Screen returns to the Basic
CANCEL
to display the Job No. Selection Screen.
OK
to return to the Basic Screen, and make new selections.
CANCEL
repeatedly to delete each character entered, then enter
DEL.
] in place of a name.
OK
CANCEL
to display the Job No. Selection
[JOB MEMORY]
to restore the Basic Screen, which
CANCEL
.
OK
to resume the Job No. Selection Screen.
to return to the Job Name Registration
OK
[AUTO/RESET]
to complete the setting and
OK
to display
.
Job Memory 9-3