Table of Contents
Advertisement
Output Modes
Group Mode (continued)
1 Press [
OUTPUT
2 Touch
TRAY2
NOTE: When using the group mode do not touch TRAY1.
3 Touch
GROUP
4 Touch
to complete the setting and return to the Basic Screen.
OK
5 Select additional copying features, as desired.
6 Enter the desired print quantity.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
8 Press [
] .
START
NOTES:
1. When the print quantity selected exceeds the finisher capacity, the copier automatically stops printing
before the number of discharged copies exceeds the capacity. Remove the copies from the tray, then press
[START] to complete the job.
2 When the Finisher is disconnected from the copier before printing, the message "Please connect finisher to
the copier" will be displayed, and if it happens to be disconnected in the middle of printing, the Jam Position
Screen will be displayed. Be sure to lock the Finisher securely to the copier to avoid the above cases.
CAUTION
To avoid injury when the Finisher middle tray moves up and down, DO NOT PUT your hand into the
two portions of the closing area.
] to display the Output Mode Screen.
or
.
TRAY3
.
Output Modes 7-9
Advertisement
Table of Contents
Troubleshooting
