Orinoco® Ap-800 And Ap-8000; Hardware Overview - Proxim ORiNOCO AP-800 Hardware Installation Manual

2.1 ORiNOCO® AP-800 and AP-8000

2.1.1 Hardware Overview

ORiNOCO® AP-800
Following sections give you a hardware overview of AP-800 and AP-8000.
2.1.1.1 LED Indicators
Tabulated below are the four LEDs, that are available on the top panel of the device:
Power LED
Ethernet LED
Wireless Interface
(Radio) 1 LED
Wireless Interface
(Radio) 2 LED
2.1.1.2 Antennas
The device comes with 3x3 MIMO omni-directional antennas that are easy to install. Proxim also recommends you an optional
accessory- Range Extender Antenna (REA), which has 3 x RP SMA plug, that can be easily connected to the device. See
Installation Procedure, for details on installation of antennas.
: AP-800 comes with a single radio and 3 omni-directional external antennas. AP-8000 comes with two radios and 6
omni-directional antennas, 3 per radio.
ORiNOCO® 802.11n Access Points - Hardware Installation Guide
Figure 2-1 Device Overview
LED Symbol Description
This LED indicates whether the device is switched
on/off.
This LED signals the traffic on the wired ethernet
LAN.
This LED provides the status of the traffic on wireless
interface (radio) 1.
This LED provides the status of the traffic on wireless
interface (radio) 2.
Hardware Overview and Installation
ORiNOCO® AP-8000
9