Capping Station; Foam Pads - Oce Arizona T220 User Manual

Océ | Printer Maintenance

Capping Station

Items Required:
• Butyl Gloves (3010101760)
• Poly-Wipe Cloth (0505-0283)
• CGS-80 Solvent (3000-0057)
• Foam-tipped swabs (0505-0285)
Procedure:
1. Use the Access Carriage command from the control panel to automatically move
the carriage to the blotting station.
2. Open the gantry doors to access the capping station.
3. Use protective butyl gloves in case of contact with ink or solvent.
4. Apply solvent to a poly-wipe cloth and begin cleaning the capping station. Wipe
away the ink buildup on the face of the capping station and inside the ink purge
drains.
Warning:
Don't reuse the ink soaked lint-free cloth on any other surfaces of
the printer.
5. Inspect drain holes. Clear clogs if necessary.
Close the gantry doors and use the Park Carriage command from the control panel to
automatically move the carriage back to the capping station.

Foam Pads

Items Required:
• Foam Pads *
• CGS-80 Solvent (3000-0057)
• Butyl Gloves (3010101760)
* There are two types of foam pad: the large Foam Pads (7500-4173) and the
small Foam Pads (3010101795). The larger pads are longer and are used in the
7-84 3010100686-B