Table of Contents
Advertisement
Océ | Troubleshooting
3.
Loosen the three 1/4 turn screws on the carriage cover with a flathead screwdriver,
then lift the cover off the carriage.
4.
Starting with the 4 Black Heads, disconnect the tube connections between the Ink
Reservoirs and the tube supplying the Print Head. Plug the fitting to the Ink
Reservoir with a Male Luer Plug immediately after disconnecting each connection.
6-74
Figure 30 Removing Carriage Cover
3010100686-B
Advertisement
Table of Contents
Troubleshooting
