Operating The Arizona T220; Powering On And Off; Ac Power Circuit Breaker Switch - Oce Arizona T220 User Manual

3

Operating the Arizona T220

Before operating the Arizona T220 printer, make sure you have read and understood
the section "Safety Information" on page 4.
Important: After powering the printer On, leave it running continuously even when

Powering On and Off

3.1
Before powering On, make sure that loose objects such as clothing, tools and cleaning
materials are not interfering with the printer mechanisms. Position the power cord so
that it does not pose a hazard when walking around or accessing the doors on the
printer. The Arizona T220 has an AC power circuit breaker switch located on the side
of the electronic enclosure.
To power on:
1. For more information regarding power requirements for the printer refer to the
Arizona T220 Site Preparation Manual.
10/16/03
at idle because the printer automatically runs maintenance routines to
keep it at its optimum operating specifications. Failure to do so will result
in ink draining and possibly drying out.
Figure 11 AC Power Circuit Breaker Switch
a) Ensure the power cord is properly seated; and
b) Turn on the AC power circuit breaker.
1
3-29