Océ | Printer Maintenance
Cleaning Solution Usage
7.1.3
The cleaning solution, CGS 80, part #3000-0057, is a solvent used to flush print heads
and clean ink from surfaces with a lint-free cloth. Ink stains on painted sheet metal
should NOT be exposed to the cleaning solution as it will cause the paint finish to smear.
Use isoprophyl alcohol to clear ink on painted surfaces.
The cleaning solution is also used to supply and preserve the capping station foam pads
during operation of the printer. The operator replaces or refills the cleaning solution
container located on the ink supply tray when the printer senses the bottle is nearing
empty.
Cleaning ink buildup from the capping station, carriage face plate, and the print head
nozzle plate help to ensure optimum performance from your Arizona T220 printer .
Cleaning should be done once a week or as required before media placement and large
print runs.
Recommended Maintenance Frequencies
7.1.4
Table 4 Arizona T220 Printer Operator Maintenance Schedule Guidelines
Description
Pre-fire Stripe Catcher
Swabbing Print Heads
Remove Ink from Table
Carriage Underside
Capping Station
Foam Pads
Gantry Rails
Air Filter
Coalescing Filter
Linear Encoders
7-78
Location in Manual
Frequency
Daily
Weekly, or as
required
As required
Weekly
Weekly
Weekly
Monthly
Every 6 months
Every 6 months
Every 6 months
3010100686-B