Emptying The Waste Bottle; Gantry Doors Open Showing Waste Bottle - Oce Arizona T220 User Manual

Six color digital inkjet large format printer

Hide thumbs Also See for Arizona T220:

Table of Contents

Océ | Ink System Management

Emptying the Waste Bottle

4.1.5

The printer accumulates waste that is made up of ink and solvent. The waste bottle is

located in the right side of the gantry beneath the capping station. A sensor monitors the

waste level in the bottle, and a high level is reported on the control panel.

The waste bottle should be emptied when the control panel indicates that the waste bottle

is almost full. To empty the waste bottle:

Remove the waste bottle from the bracket and pour the waste into a suitable

container for disposal. Dispose of waste in accordance with local laws or as directed

in the MSDS sheets — See "Safety Information" on page 4.

Note:

If you need to replace the waste bottle container with a new one, or if you

require a spare bottle, order part # 3010100266.

Replace the empty container by fitting it into the bracket;

Ensure that the lid is securely screwed on to the waste bottle.

4-58

Figure 23 Gantry Doors Open Showing Waste Bottle

3010100686-B

Table of Contents