Safety Labels - Oce Arizona T220 User Manual

Océ | T220 Product Overview

Safety Labels

1.2.1
Table 1 Safety Labels
Label
Burn Hazard
Shock Hazard
DANGER High Voltage
Electric Shock Hazard
1-6
Description
Located on the heater assembly at the Home
end of the gantry. Entire gantry area is hot
during and after printing.
Located on the heater assembly at the Home
end of the gantry. Area is heated by electricity
and is a potential shock hazard.
Remove power before servicing
Located inside the electronics enclosure. AC
power cable should be disconnected before
servicing any electrical components.
This equipment is to be serviced by
trained personnel only
Located on the door to the electronics
enclosure. This door must be kept locked and
only opened by a trained technician.
3010100686-B