Oce Arizona T220 User Manual page 45

underline indicating it can be increased or decreased using the + or - keys. When the digit
you want is displayed, press ACCEPT and the underline moves to the next digit. When
you are at the last digit, pressing ACCEPT sets the delay time.
Away Drying Delay
Print Mode
speed 1x
Sets a delay time for the carriage each time it reaches the away position during printing.
Use the ACCEPT key to move through the displayed digits. The selected digit has an
underline indicating it can be increased or decreased using the + or - keys. When the digit
you want is displayed, press ACCEPT and the underline moves to the next digit. When
you are at the last digit, pressing ACCEPT advances to the Copies display (if enabled).
Copies
Print Mode
speed 1x
Press + or - to change the number of copies printed. Options are 1 to 100. Use the
ACCEPT key to move through the displayed digits. The selected digit has an underline
indicating it can be increased or decreased using the + or - keys. When the digit you want
is displayed, press ACCEPT and the underline moves to the next digit. When you are at
the last digit, press ACCEPT to choose the number of copies that is displayed. The
display will advance to the Overprints display (if enabled).
Overprints
Print Mode
speed 1x
Press + or - to change the number of times the image prints on top of the first print.
Options are 1 to 3. Use the ACCEPT key to move through the displayed digits. The
selected digit has an underline indicating it can be increased or decreased using the + or
- keys. When the digit you want is displayed, press ACCEPT and the underline moves
to the next digit. When you are at the last digit, press ACCEPT to choose the number of
overprints. The display will advance to the Media Thickness display.
10/16/03
PRINT PARAMETERS
Drying delay-away: 0.0 sec
PRINT PARAMETERS
# Copies: 1
PRINT PARAMETERS
# Overprints: 1
Printing a Job |
3-33