Appendix A Installing Special Prints; 0.1Installation Procedure - Oce Arizona T220 User Manual

Appendix A
The Operator / Special Prints menu contains two possible selections: the Menu
Tree and the Table Grid. If you need an udated version of these print files or if you
loose the original file, they are all available for downloading at the ODGS web site
T220 customer support page:
http://www.oce-dgs.com/PrinterSupport/T220_Customer/
T220_Customer_Access.htm
These files are also available at the ODGS FTP site (login as anonymous):
ftp://ftp.cymbolic.com/Downloads/Inkjet/ArizonaT220/ImageData/

0.1Installation Procedure

Transfer the downloaded special print file to the T220 by copying it from the hard
drive on the computer.
1. Connect a parallel cable between your computer and the T220 printer.
2. Prepare the T220 for receiving data through the parallel port by doing the
following at the printer Control Panel:
3. Open a Command Prompt and input:
C:\>copy xxfilename.Print lpt1 <ENTER>
After transfer, the file is located in the Operator/Special Prints menu.
4. Set the Configure I/O menu back to SCSI transfer mode to enable transferring of
regular print jobs from PosterShop.
10/16/03
Installing Special Prints
• a. Navigate to the Configure I/O menu using the MENU button,
then press ACCEPT.
• b. Press the - or + key until you see "active: parallel" on the display,
then press ACCEPT.
• c. Press ONLINE to exit the menu system.
-89-