Table of Contents
Advertisement
Status Lights
2.2.2
The status lights on the control panel indicate the following:
ERROR.........................................Indicates a printer problem has occurred.
CHECK .........................................Flashes in conjunction with operator
INK................................................Indicates a low ink level condition.
Emergency Stop
2.2.3
If a situation requires an immediate shutdown of all printer activity, press the Emergency
Button. To recover from an emergency shutdown, resolve the problem that prompted the
shutdown and then release the Emergency Stop by twisting it slightly counterclockwise.
Then press the ACCEPT button to restart the printer.
If you are not close to the Emergency Stop when you need an immediate
Note:
shutdown, it is possible to open the one of the gantry doors to initiate an
interlock shutdown.
Online Screen
2.2.4
The operator control panel displays the online screen whenever it is not displaying the
menu system or presenting error messages. If you are in the menu system and you press
the ONLINE button, the panel displays the online screen thus confirming you are no
longer in the menu system. The top right corner of the online screen alternates between
displaying the print zone temperature and the status of the vacuum system (either ON or
OFF).
System clock
12:00
10/16/03
messages (e.g., Blotting cloth low or empty).
Arizona T220
Power Save
Firmware Revision
Key Pad, Display Screen and Status LEDs |
Ink = Ink Temperature
Vac = vacuum
[
1.0]
Ink:26°
2-11
Advertisement
Table of Contents
Troubleshooting
