Table of Contents
Advertisement
Océ | Printer Maintenance
7.
Saturate a clean swab with solvent.
Warning:
Each swab has a seam that may scratch the nozzle plate. For
cleaning use the long semi-curved smooth sides of the swab.
8.
Start with a single color. Gently move the swab along the length of the nozzle
plate. Move the swap laterally during swabbing to insure no debris from any one
nozzle can be swept into an adjacent nozzle. Dip the swab into the solvent after
swabbing each head.
Caution:
Applying too much force with the swab may scratch the nozzle
plate.
9.
Repeat steps 6 and 7 for each color. Remember to use a clean swab for each color.
10.
Close the gantry doors and use the Park Carriage command from the control panel
to automatically move the carriage back to the capping station.
11.
Initiate a high purge for all colors to clear any solvent from the printheads.
12.
Discard the swabs and solvent in the solvent cup. Do not re-use.
7-82
3010100686-B
Advertisement
Table of Contents
Troubleshooting
