Oce Arizona T220 User Manual page 64

Océ | Operating the Arizona T220
Situation
Gray Balance
Long USB Cable for
Eye-One
Spectrophotometer
Ideal operating Ink
Temperature
Exporting
Spectrophotometer
Readings
Using Menu key
when altering
offsets, height or
heat
3-52
Recommendation
Obtain good gray results by individually setting the ink restriction
value of each color (maximum deviation between colors should
be <= 30%), then using the Gray Balance Linearization in
PosterShop.
Also, grays will tend to have a green/yellow cast if the drying
temperature is too low.
We recommend that you purchase a 16' USB cable (maximum
USB cable length spec.) or a 10' USB cable extension for use
with the Eye-One Spectrophotometer.
The recommended operating range of ink temperature is 32C to
38C (90F to 100F).
When making a media model (linearization) or ICC profile we
recommend that the Eye-One Spectrophotometer readings are
exported immediately after reading the patch values. The
reason is that if the patch readings are saved and backed up,
profiles can be reconstructed at a later date if required.
If the + key is pushed to modify offsets, carriage height or heater
duty cycle, pushing the Accept key will advance the cursor to the
next digit of the current parameter. However if no changes are
desired for this parameter pushing the Menu key will advance to
the next parameter.
3010100686-B