Air Filter (Electronics Enclosure); Linear Encoders (Table And Gantry) - Oce Arizona T220 User Manual

Océ | Printer Maintenance

Air Filter (Electronics Enclosure)

Items Required:
• Air Filter (Part #
Procedure:
1. Remove the filter grill to access the filter.
2. If the filter is dirty but otherwise undamaged, clean it using a mild solution of
water and dish detergent.
3. Thoroughly dry the filter using a cloth and/or forced air dryer. Water must never
contact any electrical devices.
4. If the filter is damaged, replace it. Contact Océ for a replacement filter.
5. Re-install the filter and grill.

Linear Encoders (Table and Gantry)

Items Required:
• Poly-Wipe lint-free Cloth
• Iso-Propyl Alcohol
Procedure:
1. To clean, wipe with a clean dry cloth. If necessary wipe with a wetted cloth soaked
sparingly with iso-propyl alcohol.
The linear encoders are protected by a lacquer coating which makes them tolerant to
handling and contamination but which can be damaged by exposure to aggressive
solvents.
Caution:
DO NOT use the following aggressive solvents to clean the scale:
DO NOT attempt to wipe off an aggressive solvent (CGS-80 or Ink)
if the scale is accidentally splashed. Allow the solvent to evaporate
naturally to leave the protective lacquer undamaged.
7-88
3010043253
Acetone, Chlorinated Solvents, Benzine, Methylated Spirits
)
3010100686-B