Changing An Ink Bottle; Ink Station Showing Ink Bottles - Oce Arizona T220 User Manual

Six color digital inkjet large format printer

Hide thumbs Also See for Arizona T220:

Table of Contents

Océ | Ink System Management

Changing an Ink Bottle

4.1.2

The ink bottles are located on the Ink Station tray. Ink levels for each bottle are

monitored by sensors. Low ink levels are indicated on the control panel.

Important: To reduce the chance of poor image quality, do not shake the ink supply

bottles before installation or during printing. This may introduce air

bubbles into the ink supply system.

When the control panel displays an "XXX ink low" message, that particular ink should

be replaced. Ink can be replaced at any time, with one exception — Do NOT replace inks

immediately after a purge since the ink pumps may be activated at that time. To replace

an ink bottle:

Unscrew the lid on a new ink bottle and remove the silver sealing foil;

Unscrew the lid on the empty ink bottle and unplug the coupler. Note that the lid

stays attached to the ink line and coupler. Put the old bottle aside and immediately

place the coupler into the new ink bottle by pushing the flange all the way into the

ink pick-up insert;

Important: Ensure that the coupler is fully inserted into the ink pick-up insert to

prevent air being drawn into the ink line when the pump is on.

4-54

Figure 21 Ink Station showing Ink Bottles

3010100686-B

Table of Contents