Table of Contents
Advertisement
Carriage Underside
Items Required:
•
Poly-Wipe Cloth (0505-0283)
•
CGS-80 Solvent (3000-0057)
•
Butyl Gloves (3010101760)
•
Safety Glasses
Safety Information
Use appropriate safety equipment — butyl gloves, eye protectors, and respirator.
Procedure:
1.
Use the Access Carriage command from the control panel to automatically move
the carriage to the blotting station (see Figure 4 on page 14).
2.
Open the gantry doors and lower the blotting station in order to access the
underside of the carriage.
3.
Use protective butyl gloves in case of contact with ink or solvent.
4.
Apply solvent to a lint-free cloth and gently wipe away any ink buildup on the
underside of the carriage. Important. Be careful not to touch any of the print head
nozzle surfaces.
5.
Close the gantry doors and use the Park Carriage command from the control panel
to automatically move the carriage back to the capping station.
10/16/03
Weekly Maintenance |
7-83
Advertisement
Table of Contents
Troubleshooting
