Color Bar - Oce Arizona T220 User Manual

COLOR BAR

The Color Bars menu prints a set of color bars. The eleven color bars start with
Light Magenta and end with Black. Follow these steps to print the color bars:
CONFIGURATION PRINT
The Configuration Print menu provides the operator and Océ Display Graphics
Systems service technicians with a printout of machine-settings data that is useful if
the unit must be diagnosed or recalibrated. A current configuration print for your
printer should be stored for reference.
10/16/03
1. Press the MENU button twice at TEST PRINTS nozzle print. You then
see:
TEST PRINTS
color bars
2. Press ACCEPT. You then see:
COLOR BARS
overlap: (4, or 8-pass)
3. Use the +/- buttons to set overlap type and press ACCEPT. You then see:
COLOR BARS
dir.: (bidir L<->R, unidir L<-R, unidir L->R)
4. Use the +/- buttons to set the write direction, and press ACCEPT. You
then see:
COLOR BARS
position: (left, center, or right)
5. Use the +/- buttons to set the print origin, and press ACCEPT. You see:
COLOR BARS
print width: (8.0" - 59.9")
6. Use the +/- buttons to set print width (8.0" - 59.5"), and press ACCEPT.
You then see:
COLOR BARS
(4 or 8) pass
7. Use the +/- buttons to select the number of passes, and press ACCEPT.
The printer begins printing the color bars.
Menu Structure |
2-19