Refilling The Solvent Bottle; Ink Station Tray Showing Solvent Bottle - Oce Arizona T220 User Manual

Six color digital inkjet large format printer

Hide thumbs Also See for Arizona T220:

Table of Contents

Refilling the Solvent Bottle

4.1.4

Solvent is used to maintain the capping station. The solvent supply bottle is located on

the end of the ink station tray, to the right of the ink bottles. A sensor monitors the

solvent level in the bottle. A low solvent level causes a message to display on the control

panel.

Refill the solvent bottle when the control panel indicates the solvent is low. Top up the

solvent bottle if the printer is to be left unattended longer than overnight. To refill the

solvent bottle:

Unscrew the lid and remove the coupler. Remove the solvent bottle from the Ink

Station Tray before filling. This prevents spilling of solvent on the painted metal

surfaces or the solvent level sensor;

Note:

Tapping the sides of the lid on a new 1 gallon solvent container will ease the

removal of the lid.

Place the funnel (Part #3010100404) into the off-center hole in the ink pick-up

insert inside the solvent bottle and fill the solvent to the level of the shoulder on the

bottle.

Set the bottle on the tray and replace the coupler by inserting it fully into the hole in

the lid. Screw the lid back on securely.

10/16/03

Figure 22 Ink Station tray showing Solvent Bottle

Océ Ink and Solvent |

4-57

Table of Contents