Table of Contents
Advertisement
Océ | Ink System Management
2.
Use the barcode wand located under the Control Panel to scan the barcode on the
ink bottle (Tip: hold the wand at an angle while moving smoothly at a constant rate
across the barcode). When the scan is successful, the following displayappears for a
few seconds, then printing can continue:
RGIBC: xxxxxxxx
Manually Entering a Barcode
If you press ACCEPT during the Scan Barcode ACCEPT -> Manual Entry display, you
access the manual barcode routine.
Look up the string of digits located below the bar code on the ink botle, and enter them
one at a time. Use the + and - keys to cycle through the digits until you see the one you
need. Press ACCEPT to move to the next blank space and select the next digit. When the
last barcode digit is entered, pressing ACCEPT cause the display to show Scan Barcode:
color/ RGIBC: xxxx (where xxxx is the barcode you just entered). After this confirming
display, printing can continue.
4-56
Scan Barcode:
BARCODE
------------
Light magenta
3010100686-B
Advertisement
Table of Contents
Troubleshooting
