Table of Contents
Advertisement
Océ |
· EN 294: 1992 Safety of Machinery - Safety Distances to Prevent Danger Zones Being
Reached by Upper Limbs
· EN 60204 - 1: 1998 Safety of Machinery - Electrical Equipment of Industrial Machines
Part 1: General Requirements
· EN 563: 1994 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics
Data to Establish Temperature Limit for Hot Surfaces
CATEGORY:
This equipment is considered to be information technology equipment for use in a light
industrial setting. The equipment falls under the scope of the Machinery Directive due to
the movement associated with the gantry carrying the printer head carriage assembly. As
such, a full risk assessment per EN 1050 and a full mechanical and machinery assessment
per EN 292-2 + A1, Annex 1 was performed. As the equipment is primarily information
technology equipment (large format printer receiving print data from a computer terminal),
and is within the scope of EN 60950 (mains operated ITE equipment under 600V
including plotters and photoprinters - clause 1.1.1, EN 60950: 2000), a full electrical
evaluation was performed per EN 60950: 2000.
EMC:
This device complies with Class A emission limits in accordance with:
EMC Directive 89/336/EEC
EN61000-6-2:2000
EN61000-6-4:2000
FCC Part 15:2001
Any errors or omissions should be brought to the attention of the contacts listed below.
Manufacturer:
Oce Display Graphics Systems (ODGS)
13231 Delf Place - Building #501
Richmond, British Columbia
Canada V6V 2C3
Contact: Colin Soutar
Email: colin.soutar@dgs.oceusa.com
http://www.cymbolic.com/
http://www.oceusa.com/
http://www.dgs.oce.com/
(604) 232-2345 Direct Dial
(604) 273-7730 Reception
(604) 273-2775 Fax
7:00AM - 4:30PM PST
-viii-
3010100686-B
Advertisement
Table of Contents
Troubleshooting
