Fluke 9100 User Handbook Manual page 8

Final Width = 215mm
6.2 Index of IEEE 488.2 and SCPI Codes used in the 9100
6.2.1 Common IEEE 488.2 Commands and Queries
Program Coding Description
CLS Clears event registers and queues (not O/P queue)
ESE Nrf Enables standard-defined event bits
ESE? Returns ESE register mask value
ESR? Reads Event Status register
IDN? Reports manufacturer, model, etc.
OPC Sets the 9100 to monitor the 'No-Operations-Pending' flag.
OPC? For 'No-Operations-Pending' flag 'TRUE', places a 1 in the Output Queue.
OPT? Recalls the instrument's option configuration.
PSC 0/1 Sets/resets power-on status clear flag
PSC? Recalls power-on status clear flag
PUD Allows entry of user data to protected store
PUD? Recalls user-entered data
RST Resets instrument to power on condition
SRE Nrf Enables Service Request Byte bits
SRE? Returns Service Request Byte mask value
STB? Non-destructively reads Service Request Byte
TST? Perform Full Test
WAI Conforms, but little relevance to 9100 application
6-2 Section 6: 9100 System Operation — SCPI Language
Appendix C, Page:
6-C1
6-C2
6-C2
6-C3
6-C4
6-C5
6-C5
6-C6
6-C7
6-C8
6-C9
6-C10
6-C11 / App D, p6-D1
6-C11
6-C12
6-C12
6-C13
6-C14