Tools and Utilities Module
Introduction
The Tools and Utilities Module provides access to three sub-modules: Special Prints; the
Ink Flush Procedure; and the System Logs. When you click on the Tools and Utilities
tab, the Special Prints screen always appears first. Click on the buttons for the other two
sub-modules to access them.
Special Prints provides various special adjustment prints, ruler images, a quality control
Reference print image, and the Nozzle Check print. It also provides some adjustment
and alignment prints for service technicians use only.
Ink Flush clears the selected color ink line. This procedure is used only when you change
to a different kind of Océ-approved ink and need to flush out all of the existing ink.
The System Logs allows the operator to generate log files for service diagnostics and
troubleshooting purposes.
Illustration
[45] Tools & Utilities Module
Special Prints
The Special Prints module displays two lists. The list on the left shows the available special
prints. Some of these prints are used by service technicians to adjust and troubleshoot
Chapter 4 - How to Navigate the User Interface
Tools and Utilities Module
69