Chapter 4; How To Navigate The User - Oce Arizona 200 GT User Manual

Component
3) Pause/Resume
and the Ink System
Status
4) Command
Toolbar left
5) Command
Toolbar right
6) Active Jobs List
7) Job Placement
Preview
8) Inactive Jobs
9) Job Information
and Parameters
panel.
10) Interface Tabs
11) Software Ver-
sion Number and
Image Upload
Progress
Job Control Components Explained
1) Job and Printer Status Panel
The job status panel is in the top left corner of the display screen. It shows information
about the current state of the printer or job activities.
Printer Status
Job name currently printing
Total copies, number of printed copies and copy progress
Overprint progress and number of overprints if more than zero
Function
To the right is the print job Pause/Resume button and
the Ink System Status icon - click to view an ink status report.
Displays icons for actions related to the print jobs and control
of the printer.
Displays icons for ink temperature, lamp control, start print
jobs, and print a nozzle check.
Displays a list of all Active print jobs.
Displays the selected print job with a preview that shows the
placement of that job on the printer.
Displays a list of all Inactive print jobs.
This panel shows the parameters of the currently selected print
job and also allows changes to the parameters associated with
that job .
Use these tabs to select the different modules of the printer user
interface.
Displays the current installed version of the printer software.
The image upload progress panel indicates the name of a print
job that is currently uploading to the printer. This panel is not
always visible and appears only when an image is loading to the
printer. It is located below the software version number when
it is active.
Chapter 4 - How to Navigate the User Interface
Print Job Control Module
57