Oce Arizona 200 GT User Manual page 191

in the Advanced tab in the Spot field. In testing, we have found this value is usually ac-
ceptable if left at 100%.
[147] Set Ink Restrictions
If you are printing on clear materials make sure the opacity is acceptable as well as exhibit-
3.
ing no over-inking artifacts. You may find that you will need to configure multiple layers
as described earlier to get the coverage you desire. Determine the ink restriction values
for your color channels as usual using either the density or chroma method. Depending
on the swatch you reprint to verify your results, the spot channel may not be printed.
Click > Next to continue.
4.
Calibration/Linearization
To print the calibration swatch:
Click > Print Swatch and select a manual hand-held strip device or spot color sampling
1.
device and click > Print.
How to Create a Media for White Ink Print Jobs
Chapter 8 - How to Work With White Ink 191