Oce Arizona 200 GT User Manual page 78

How to Power the Printer On and Off
Turn the AC power switch to the Off position.
1.
Apply a lock and a tag-out label to the Lock-out area of the switch for the duration of
2.
any service or maintenance procedures.
Close the purge valves on top of the Carriage ink reservoir to prevent the ink from
3.
draining into the maintenance Station.
Open the purge valves again when the power is turned back on.
4.
When maintenance or service is complete, remove the lock and tag-out label and turn
5.
the AC power switch to the On position.
Illustration
[49] AC Power Switch and Lockout
78 Chapter 5 - How to Operate the Océ Arizona 200/250/350 GT