Oce Arizona 200 GT User Manual page 176

How to Use Media Models to Print With White Ink
When you process a print job in ProductionHouse with this media model as provided,
the job information displayed in the Arizona 350 GT Print Job Control module will appear
as follows:
[124] Parameters
Select the Layers button in the Job Control module to activate a graphical representation
of the Print Layers that allows you to verify the layer order.
[125] Print Layers
Backlit Application on Clear Substrate
Download file: Oce_Arizona_350_GT_WhiteInk_ClearBacklit.OML
This media model is intended for use when you print data for backlit viewing on clear
materials. Clear materials do not provide any light diffusion, which is often desired for
more pleasing presentation on non-diffused light sources. Therefore, this media is built
using 2 layers of CMYK data for color density followed by a layer of white flood data for
diffusion. Since a Flood Fill layer has been defined, no additional file prep is required to
activate white printing. Because this media is built for second surface backlit viewing, it
176 Chapter 8 - How to Work With White Ink