Chapter 4; How To Navigate The User; Operator Interface Software - Oce Arizona 200 GT User Manual

Operator Interface Software

Operator Interface Software
Introduction
The Océ Arizona 200/250/350 GT software interface is displayed on the LCD monitor
that is part of the Operator Control Station. The interface has five main working modules
that are accessed by tabs located at the bottom of the display. Click on these tabs with
the mouse to access the modules. Print Job Control is the default module displayed when
the software interface has finished loading after the printer is switched on or reset.
The Print Job Control display is divided into functional and status areas. The functional
areas supports all operator input necessary to operate, maintain and service the printer.
The status areas are used to report printer status.
Onscreen Keyboard & Numeric Keypad
A mouse is used as the input device. For operations that require operator input, the mouse
is used to select either numeric characters from a virtual keypad or alphanumeric charaters
from a virtual keyboard. These virtual input screens are displayed on the interface LCD
monitor when data entry is required.
Illustration
[35] Virtual Keyboard
54 Chapter 4 - How to Navigate the User Interface