Roll Media Safety Awareness - Oce Arizona 200 GT User Manual

Roll Media Safety Awareness

Roll Media Safety Awareness
Introduction
This section contains two sets of principles that must be followed to assure maximum
safety when operating the Roll Media Option for the Océ Arizona 200/250/350 GT
printer. The first image uses a negative example to show you a situation to avoid in order
to prevent injury to the operator. The following images illustrate some of the residual
risks that are inherent in the operation of the printer. These are situations or physical as-
pects of the printer that may present a potential danger to the operator, but would com-
promise the capabilities of the printer if changed. Therefore, they are pointed out as a
precaution the operator must be aware of when using the printer with the Media Roll
Option.
Attention:
The photos in the following table illustrate residual risks that must be avoided when op-
erating the Océ Arizona 200/250/350 GT printer.
Situation and Action to Avoid
How NOT to use the Roll Media Option
Avoid these Situations For Your Personal Safety
Residual Safety Risks
The Océ Arizona 200/250/350 GT Roll Media Option is engineered to minimize machine
components and operating procedures that may compromise operator safety. However,
in order to maintain some machine operations and functionality, certain compromises
are required. The following table documents some of these residual hazards. By making
44 Chapter 3 - Safety Information
#
Do not place you
hands near any of the
media shafts or the
media tension bar
when the printer is
printing.