Oce Arizona 200 GT User Manual page 112

Roll Media Manager
Roll Media Manager Menu
Roll Media Manager Icons
Icon
Load
Unload
Initialize
Print Side
Normal Move /
Slow Move
How to Use the Roll Media Manager
The procedures to use these icons to load and unload media is explained in the next two
sections. How to verify or change media parameters and to actually print a roll media job
is explained in the section "How to Print on Roll Media".
112 Chapter 6 - How to Operate the Roll Media Option
#
Function
Allows the operator to load new media. Set the foot pedal
switches to the Load state.
Prepares the RMO to allow the operator to cut the existing
media, remove it, and replace it with a new roll.
Sets up tension on the loaded media and prepares the RMO to
print on that media.
Operator can select either Print Side In or Print Side Out. Print
Side In allows you to print on the back side of the media. The
default setting is Print Side Out.
Normal Move is the default state. When you click on this icon
in the top right corner, it changes to Slow Move. Use Slow
Move when you want to advance or rewind media and stop it
at a more precise position. It causes the dual foot pedal switches
to move the media more slowly.