Oce Arizona 200 GT User Manual page 245

Correction
To correct the nozzle dropout problem illustrated above, perform Printhead Maintenance
1.
'' on page ?
If the second Nozzle Check still shows nozzle dropouts, suction the printhead that still
2.
show nozzles out again.
If nozzle outs still remain, swab that printhead
3.
Result
When a printhead does not have any dropouts, it will look like the Nozzle Check print
of the black (K) section illustrated below.
Note:
There is an indication of some poor directionality in one of the nozzles illustrated in the
top left section of the sample below, but it will not affect image quality (although it
could, if multiple adjacent nozzles show this problem).
[163] Nozzle Check Print Black Section
on the colors that show dropouts, and then print the Nozzle Check again.
'Swab Printheads' on page
Chapter 11 - Printer Maintenance
Print a Nozzle Check
223.
245