How To Maintain White - Oce Arizona 200 GT User Manual

How to Maintain White Ink
Remove the spit catcher foam pad and replace it with a new one.
4.
[170] Change Spit Catcher Pad
How to Clean Ink from the Maintenance Tray
During regular daily printhead maintenance, observe the honeycomb grid on the top of
the maintenance door and if you see any accumulation of white ink, clean as follows:
Slide the door out from under the carriage to reveal the maintenance station.
1.
Pour some flush on a lint-free cloth and wipe away any ink deposits.
2.
On a new cloth, apply some alcohol and remove any residual flush or other debris.
3.
Note:
If you leave the maintenance door open and do not wipe away any deposited ink, it will
gradually cure from exposure to light and thus become very difficult to remove.
254 Chapter 11 - Printer Maintenance