Tools And Utilities - Oce Arizona 200 GT User Manual

Tools and Utilities Module
the printer. Some are of interest to the Operator: the Reference print, the table ruler
prints, the Nozzle Check print, and the Media Advance Correction Factor print.
Special Prints of Interest to the Operator
the Reference print is used to determine that the printer output meets quality standards.
A reference print that is printed at the Océ Display Graphics Systems factory is shipped
with each printer. It can be used as a comparison with one printed at the customer
site.
The Table Rulers are meant to be printed on the table to assist you to place media.
These images are set up to print on the horizontal and vertical axes of the table. They
are available in metric or imperial measure.
The Nozzle Check is used to determine if there are any clogged nozzles that can affect
print quality (note that it is also available on the command toolbar in the Print Job
Control module).
the Media Advance Correction Factor print (used for roll media only). This print is
used to correct a certain type of banding related to incorrect media advance - see How
to Determine Media Advance Correction.
The list on the right shows all active jobs that are currently in the print queue. Add a
print from the left into the right list to make it active in the Print Job Control module.
If you remove a job from this list, it is also removed from the Active job list and is not
available to print.
How to Load a Special Print
1) Click a special print to select it in the left window.
2) Click the Add button to place it in the print queue on the right.
That special print is now available in the Active job list of the Print Job Control module.
How to Print a Special Print
Go to the Print Job Control module to actually print the special print. It will appear in
the active job list and is printed like any other print job.
Note:
Refer to the sections that document the special prints for details on printing. For example,
the Nozzle check and the Reference print are printed on I/O paper, while the Ruler
Guide Print is printed directly on the table. Note that some of the special prints are
meant for service technicians only and are not for use by the printer operator.
70 Chapter 4 - How to Navigate the User Interface