Oce Arizona 200 GT User Manual page 178

How to Use Media Models to Print With White Ink
Select the Layers button in the Job Control module to activate a graphical representation
of the Print Layers that allows you to verify the layer order.
[129] Layers
One White Layer on Mid-tone Grey Surface
Download file: Oce_Arizona_350_GT_MidtoneSubstrate.OML
This media model is intended for a mid-tone grey print surface. Due to the relative
lightness of the media it is not necessary to place two layers of white ink to provide opaque
white coverage before your CMYK image data. As two layers of white are not necessary,
this media model contains only one white layer followed by the CMYK color data. Since
a Flood Fill layer has been defined, no additional file prep is required to activate white
printing. To re-purpose for Spot usage, just access the drop down menu and change from
Flood Fill to Spot Data and ensure that the file has been properly built for this type of
output or appropriately edited with the Spot Layer Tool. A 2-layer configuration will
result in faster print speeds than those configured for 3 layers.
[130] Define Layers
178 Chapter 8 - How to Work With White Ink