Oce Arizona 200 GT User Manual page 225

Run a Nozzle Check print or an image test print and verify that all nozzles are firing
10.
properly.
Note:
If the problem persists, you can swab multiple times. Use a new clean side of the swab
each time (this means a maximum of two swipes per swab). It is possible that as many as
ten swipes can be required.
Run another nozzle check, if necessary. When the Nozzle Check print does not show any
11.
nozzles out, the printer is ready to produce quality images.
Chapter 11 - Printer Maintenance
Swab Printheads
225