How To Change Ink Bags - Oce Arizona 200 GT User Manual

How to Change Ink Bags

How to Change Ink Bags
Introduction
The ink is supplied to the printer in 2 liter bags. The bags have a non-spill coupler
bonded into the top corner. When installing onto the printer, the bags are inverted and
the quick connect couplers are pushed into their corresponding female coupling - opening
up the flow path for the ink. If a bag of ink with an invalid serial number, expired use-
by date, incorrect color, or expired tag is connected to the printer, then the operator is
alerted.
When to do
An ink bag can be replaced at any time. Ink bags should be replaced when:
The operator LCD panel displays an "XXX ink low" message (the ink bag does not
need to be changed immediately but monitor the level of ink remaining and change
the bag before the ink runs out.
The operator sees the bag is empty.
An ink bag is nearly empty and the operator wants to leave the printer unattended
during a long print and does not want the ink to run out. The nearly empty bag can
be reconnected and used up later when the operator is present.
Note:
An ink bag can be changed during a print job. it is not necessary to stop the printer.
Before you begin
Safety Information - Use appropriate safety equipment - nitrile gloves and eye protectors.
Take precautions to avoid ink on your skin or in your eyes.
Caution:
Be sure to read the section on Safety Guidelines for Ink Materials before handling UV
inks. Also, read the MSDS sheets available from the Customer Support web site for more
detailed information on ink safety and handling.
204 Chapter 9 - Ink System Management