How to Use Media Models to Print With White Ink
Note:
ProductionHouse also allows you to create Media Groups that contain various Media
Models. You can create a group that contains media models with different settings for
the same physical material. Or you can group together various media models that have
something in common, for example the five media described in this section belong to
the group "WhiteInkUsageMedias".
Day/Night on Clear Substrate
Download file: Oce_Arizona_350_GT_WhiteInk_DayNight.OML
This media model was built for the creation of 3-layer Day/Night Application prints on
clear materials. This method of printing is used to provide pleasing output for images
when viewed under front or back lighting conditions. Day/Night output is obtained by
first laying down a CMYK image layer, followed by a white layer (in this media the white
is a flood fill layer, but a properly setup Spot layer may provide the same desired effect),
Chapter 8 - How to Work With White Ink
173