Oce Arizona 200 GT User Manual page 37

Avoid these Situations For Your Personal Safety
[16] UV Lamp Hazard
Residual Safety Risks
The Arizona 250 GT is engineered to minimize machine components and operating
procedures that may compromise operator safety. However, in order to maintain some
machine operations and functionality, certain compromises are required. The following
table documents some of these residual hazards. By making the operator aware of the
potential risks, we hope to ensure maximum safety in the operation of this printer.
Caution: there may be a time lag between when a print job is issued and when the gantry
movement actually begins as the UV lamps must warm up first.
Arizona 250 GT Residual Risks
Risk Area
A high risk crushing
hazard is created by
the movement of the
carriage and gantry
supports. Keep hands
away from this area
unless the printer
power is off.
#
Crushing/Shear Hazard
[17] Carriage and Gantry Supports
Safety Awareness
Avoid looking at the
UV lamps, especially
if you are seated at the
same level as the car-
riage.
Also do not touch the
UV lamp assembly or
the surrounding
guard as they will be
hot and may result in
burns of the skin.
Chapter 3 - Safety Information 37